Liberon High Protection Woodstain
Liberon High Protection Woodstain is a triple action product that protects, treats and provides a durable finish to new and old interior and exterior wood. Guaranteed for 4 years it is ideal for use on interior and exterior timber such as gates, fences, window frames, panelling and beams.
Performance:
- Highly resistant to UV rays and bad weather conditions
- Non drip formula is ideal for vertical surfaces
- Touch dry in 30 minutes
- Up to 4 years protection
How to use:
Preparation-
Ensure the surface is clean and dry.
Bare wood: brush and remove all traces of dust. For greater protection timber may be treated with an exterior wood preserver before applying High Protection Woodstain.
Previously stained wood: brush the timber to remove any flaking pieces, sand to a smooth surface and remove all dust.
Varnished or painted wood: strip the timber with a general wood stripper. Neutralise in accordance with wood stripper manufacturer’s instructions, then rinse with water and allow to dry for 24 hours. Sand and remove all dust.
Oily wood: degrease before applying High Protection Woodstain.
Application-
Stir well with a stirring stick before use.
Apply a minimum of 2 coats of High Protection Woodstain with a brush, spray (10% dilution with water) or a roller (specially designed for woodstains).
Allow 3 hours to dry between coats.
On new or heavily exposed timber we recommend applying a third coat when using a light coloured stain.
Ideal conditions for application are between 12° and 25°C on wood that is not too hot in order to avoid drying marks.
Important:
Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.
Coverage - 1L =12m² Depending upon condition of wood
Finish - Satin
Pack size - Available in 750ml and 2.5L
Drying time - 30mn touch - 3h between coats - 12h final